For easy and efficient transfer of logs to the firewood processor.
The log rack makes firewood production considerably easier, as the logs can be lifted onto the rack mechanically and then transferred to a firewood processor very easily using rollers.
PIKO log rack.
Easy to load with a wood grapple or forklift forks.
Sturdy construction, rollers facilitate transporting wood to a firewood processor.
Bolt-together construction, easy to store.
The legs are height-adjustable by approximately 20 cm, allowing the table to be used with many different firewood processors.
The log rack can be used on the right or left side of the firewood processor, in front or on the side, depending on the machine.
The log rack can also be equipped with a hydraulic drive roller, which is connected to the hydraulics of the firewood processor, allowing it to be controlled at the same time as the infeed conveyor is in use. (R30 and R38 tractor-powered firewood processors)
- Rack dimensions 1800 x 1800 mm (suitable for log lengths of 2000–4000 mm)
- Rack capacity approx. 5m3
- Roller platform length 2360 mm
- Weight 130 kg
- The height of the roller platform can be adjusted from 750 to 950 mm from the ground.
- Load capacity 2500 kg
- A hydraulic drive roller is available as an accessory. (Many sizes available for hydraulic motor)
