PIKO-30 firewood processors

PIKO R30 and M30 are equipped with optimized splitting, whereby the splitting length is controlled by using the valve. If you split, for example 35 cm firewood, you only need to split about 45 cm (max splitting movement 55 cm), and you can reset the splitting and immediately make the next cut. This has the advantage of working faster. You can also stop splitting if there is a problem with the tree’s position.

The PIKO R30 and M30 are equipped with a 4 m long discharge conveyor that can be turned laterally. A hydraulic feed table is standard on all models, making working easy.

Piko-30 firewood processors are available in two basic versions: the tractor-powered R30 and the M30, which can be towed by a passenger car. In the M30 model, the wood is lifted into the machine and fed by a hydraulic 2-lever control valve.

It is also possible to install a hydraulic log lifter on the R30 model as an accessory.

The R30 model has additional hydraulic connectors that can be used, for example, for For use with a hydraulic rack table, additional hydraulic plugs are controlled from the infeed valve.

Modern design, ergonomics, and ease of use make spotting effortless with the PIKO R30 and M30! Video instructions

Technical details

• Maximum diameter of log 300 mm
• Minimum diameter of log 50 mm
• Wood cutting length (min-max) 300–550 mm
• Weight, R30 720-885 kg and M30 810 kg
• Cutting blade
  • Saw blade 13 ”/ 325/1,3 mm / 56
  • Chain 325 / 1,3 mm / 56
• Splitting cylinder thrust force 5.2 tonses
• Splitting cylinder thrust lenght 600 mm
• Adjustable splitting blade 2/4 splitting. 6-split as an accessory.
• Hydraulic conveyor length 4 m
• Hydraulic oil requirement 55 l
• Hydraulic pressure 180 bar
• Power source: R30 PTO-powered and combi (PTO+electric 7.5 kW), M30 combustion engine 17.5 HP/500 cc Brigg&Stratton
• Towable M30 registered for road use (no brakes)