PIKO-38 firewood processors

PIKO R38 and M38 are equipped with an optimised diameter, allowing the valve to control the length of the cut. If you split, for example 35 cm firewood, you only need to split about 45 cm (max splitting movement 55 cm), and you can reset the splitting and immediately make the next cut. This has the advantage of working faster. You can also stop splitting if there is a problem with the tree’s position.

The PIKO R38 and M38 are equipped with a 4 m long discharge conveyor that can be rotated sideways. A hydraulic feed table is standard on all models, making working easy.

Piko firewood processors are available in two basic versions: the tractor-powered R38 and the M38, which can be towed by a passenger car. In the M38 model, the logs are lifted into the machine and fed by a hydraulic 2-lever control valve.

It is also possible to install a hydraulic log lifter as an accessory on the R38 model.

The R38 model has additional hydraulic connectors that can be used, for example For use with a hydraulic rack table, additional hydraulic plugs are controlled from the infeed valve.

Modern design, ergonomics, and ease of use make chopping wood effortless with firewood processors! Video instructions

Technical details

• Maximum wood diameter 380 mm
• Minimum tree diameter 90 mm
• Wood cutting length (min-max) 300–550 mm
• Weight, R38 880 kg and M38 995kg
• Cutting blade
  • Cutting blade 15 ”/ 325/1,3 mm / 64
  • Chain 325 / 1,3 mm / 64
• Splitting cylinder thrust force 8.8 tonnes
• Splitting cylinder thrust lenght 600 mm
• Adjustable splitting blade 2/4 splitting. 6-split and 8-split as an accessory.
• Hydraulic conveyor length 4 m
• Hydraulic oil requirement 55 l
• Hydraulic pressure 180 bar
• Power source: R38 PTO-powered and combi (PTO+electric 7.5 kW), M38 combustion engine 17.5 HP/500 cc Brigg&Stratton
• Towable M38 registered for road use (with brakes)